Hitachi RX Technical Manual page 63

5.3.5-2 Text setup rules
(1) Line count
● When you change the line count for a print item in a certain column, you must also set the line
count for the other print items that belong to the same column.
(Example)
Transmit the line count consecutively to items 7 and 8. If you transmit the line count to only one
of them, a communication error occurs.
● When you change the line count for a print item, you must also set the line count for the other print
items that belong to the same column as the former one.
(Example)
Transmit the line count consecutively to items 7 and 8. If you transmit the line count to only one
of them, a communication error occurs.
(2) Line spacing
● When you transmit one-line setup data for a certain print item, you have to transmit a line spacing
setting of "0" as well as for the same chain as the one-line setup data.
If you do not transmit an line spacing setting of "0", a communication error occurs.
● Ensure that the same line spacing setting is selected for print items belonging to the same column.
In other words, when you transmit a new line spacing setting for a print item in a certain column,
you must consecutively transmit the same setting to the other print items in the same column.
(3) Character size and inter-character space
● The available inter-character space varies with the character size.
See "4.7.4 Set dot matrix, inter-character space, and other parameters"
Manual.
● The total number of vertical dots cannot exceed the limit.
● Some characters cannot be entered depending on the character size. If a print
item contains an unavailable character after a character size change, its contents
are changed to a space.
See "4.7.4 Set dot matrix, inter-character space, and other parameters"
Manual.
● If an inter-character space other than "0" is transmitted for a print item for which bar code setup is
completed, a communication error occurs.
5-17 ●Transmission Sequences
1 3 5 7
2 4 6 8
1 3 5
2 4 6 7
Machine type
RX-BD, RX-SD(3-line)
Option:RX-SD(4-line)
Option:RX-SD(5-line)
Setting items 7 and 8 to one line
8
Setting items 7 and 8 to two lines
Maximum number of vertical dots
30 dots
32 dots
32 dots
1 3 5
2 4 6 7
1 3 5 7
2 4 6 8
4
of the Instructions
3
of the Instructions
8