Hitachi RX Technical Manual page 27

[ Connection to the external connection terminal block (TB1 of EZJ110 P.W.B) ]
● The I/F signal with conveyer is connected.
● NPN/PNP interface can be selected for the print target detector and a part of I/O signals.
● Totem pole/Open collector(NPN) can be selected for the encoder signal.
● Pin #5, #6 and #11 to 24 --- RX-S:Standard, RX-B: Option
Pin
No.
NPN Interface
1 Power supply
2 Print target detector Ground
3 Ground
4 NC
5 Print stop
6 Signal ground
7 Encoder power supply
8 Encoder signal (Totem pole)
9 Encoder signal (Open collector NPN)
10 Encoder ground
11 Deflection voltage ON/OFF signal
12 Reciprocative print signal
13 Run signal
14 Reset signal
15 Stop signal
Print-in-progress/
16
Print-complete
17 Online output
18 Universal output 1
19 Universal output 2
20 -
21 -
22 -
23 -
24 Signal ground
25 Ready
26 Signal ground
27 Fault
28 Warning
(*1): The supplying power capacity for print target detector and encoder is up to 100mA in total.
4-6 ●Input/output (I/O) signal connection
Name
PNP Interface
Print target detector Output Input
NC
Power supply
-
-
-
-
Print-in-progress/
Print-complete
Online output
Universal output 1
Universal output 2
-
-
-
-
Input/output
NPN PNP
● DC24V, 100mA max. (*1)
Input -
● Power supply can be selected by SW1
● Connection pin number is different
- -
between NPN and PNP interface.
- Output
Input
● NPN / PNP can be selected by SW2
● RX-S: Standard, RX-B: Option
-
Output
● DC24V, 100mA max. (*1)
Input
● Totem pole / Open collector (NPN) can
be selected by SW1
Input
● Power supply can be selected by SW1
-
Input
Input
● NPN / PNP can be selected by SW2
Input
● RX-S: Standard, RX-B: Option
Input
Input
Output -
Output -
● Print-in-progress/ Print-complete can be
Output -
selected with screen operation.
Output -
● Connection pin number is different
between NPN and PNP interface.
- Output
NPN interface: No.16-19
PNP interface: No. 20-23
- Output
● RX-S: Standard, RX-B: Option
- Output
- Output
-
Output -
- -
● Open collector (NPN) only
Output -
Output -
Remarks