Hitachi RX Technical Manual page 138

Open the "Circulation control" screen, and press the
4
Recovery-line operation check key and then the Start/Continue key.
Circulation control
Ink drainage
Pressure relief
Parts usage time
management
Select option; press [Start/Cont.]
Follow the operation guidance on the screen.
5
● Open the print head cover and place the opened head into the beaker to pour the makeup in the
gutter.
● Follow the operation guidance on the screen to pour the makeup in the gutter.
●The recovery path is operating normally if the makeup flow is confirmed in Tube B after the makeup
is poured in the gutter.
Cleaning bottle
An ink fixing may be caused if the makeup flow in Tube B is NOT confirmed.
For restoration, a special work is required. Contact the local distributor nearest to you.
The operation checks before conducting "Process after long-term shutdown" is completed .
If the printer does not operate normally after the procedures explained above, abort the operation.
A special work is required for the restoration. Contact the local distributor nearest to you.
[Stop ]
Circulation system
Ink refill
cleaning
Recovery-line
Ink stream
alignment operation check
Circulation system
Viscometer
environment setup
calibration
Proc. status:
Gutter
Beaker
CAUTION
2015.07.07 12:45
Com=0
HOME
Prev.Dsp. Next Dsp.
Cancel
Start/Continue
Start/Continue
Tube B
●Long-term Shutdown 6-33