Bosch BPT-S 5 Hybrid Installation Manual page 218

74 | Installation
WARNING
Storage system | Installation manual
Risk of injury due to sharp edges
The components have sharp edges, which can cause
hand injuries if they are not handled carefully.
Wear protective gloves

Mount the components with two people

Prerequisites
The bracket for the BMM is attached to the front of

the battery cover.
The BMM terminals are facing upwards

▶
Procedure
1. Use the 2.5-mm Allen key to screw the BMM to the
bracket on the battery cover with four M4 rounded
head screws and washers so that the module
terminals are facing upwards. (Tightening torque
0.5 Nm)
English
Bosch Power Tec GmbH