Memory - HP ProLiant SL165z G6 Maintenance And Service Manual

Memory

HP ProLiant SL165z G6 server has sixteen DIMM slots that support up to 128 GB maximum system
memory.
You must adhere to the following guidelines when adding or replacing memory modules:
•
Supports DDR2 667 or 800 MHz SDRAM with Advanced ECC (Registered).
•
Supported configurations:
○
Two DIMMs per processor: J107, J106 for CPU1; J14, J13 for CPU0.
○
Four DIMMs per processor: J107, J106, J105, J104 for CPU1; J14, J13, J12, J11 for CPU0.
○
Six DIMMs per processor: J107, J106, J105, J104, J103, J102 for CPU1; J14, J13, J12,
J11, J10, J9 for CPU0.
○
Eight DIMMs per processor: J107, J106, J105, J104, J103, J102, J101, J100 for CPU1;
J14, J13, J12, J11, J10, J9, J8, J7 for CPU0.
○
DIMM pairs must be identical.
Figure 13 DIMM slots
To remove memory module:
1. Completely open the holding clips securing the module.
2. Gently pull the memory module upward to remove it from the slot.
Contents 38