HP ProLiant SL165z G6 Maintenance And Service Manual page 33

Figure 5 Installing the hard drive assembly
To remove hard drive:
1. Slide the HDD carrier latches to unlock the HDD handle.
2. Raise the HDD handle.
3. Lift the HDD assembly out of the tray
4. Rotate the HDD carrier handle down and then lock the HDD carrier latches.
Figure 6 Removing the hard drive assembly
WARNING: Ensure that the system is powered off and all power sources have been disconnected
from the server. Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in the off position.
Contents 33