HP ProLiant SL165z G6 Maintenance And Service Manual page 65

Figure 47 IPMI Configuration menu of the BIOS Setup Utility
Table 11
IPMI Configuration submenu fields
Field Description
SEL Configuration Select SEL Configuration in the left frame of the screen to go to the submenu for that item.
Then you can press Enter to enter its submenu. You can display a submenu about SEL
Configuration option by highlighting it using the <Arrow> keys.
Serial Port Select Serial Port Configuration in the left frame of the screen to go to the submenu for
Configuration that item. Then you can press Enter to enter its submenu. You can display a submenu
about Serial Port Configuration option by highlighting it using the <Arrow> keys.
LAN Configuration Select LAN Configuration in the left frame of the screen to go to the submenu for that
item. You can display a submenu about LAN options by highlighting it using the<Arrow>
keys. Set LAN Setup options are described in this section. The Set LAN BIOS Setup
screen is shown below (When you have a LO100 Device, this item will display).
Watchdog Select Watchdog Configuration in the left frame of the screen and press<enter> to go to
Configuration the submenu for that item. That will display POST Watchdog Timer Action, BMC Watch
Dog Time Out; you can change the default value.
Hardware health Select Hardware Health Information in the left frame of the screen and press<enter> to
information go to the submenu for that item. That will display CPU temperature, ambient temperature,
CPU fan speed, system fan speed, chassis fan speed. These items cannot be changed by
the user. It accords with the sense of the case. If there is LV CPU and no card in slot1,
then System Fan 6 Rotor 1 and System Fan 6 Rotor 2 no display.
Contents 65