HP ProLiant SL165z G6 Maintenance And Service Manual page 42

Figure 20 Installing the PCIe riser card on the bracket
To install the riser card with the bracket on the system board:
1. Align the riser card connector with the slot on the system board and then insert the assembly into the slot.
2. Fasten the screw to secure the bracket to the chassis.
Figure 21 Installing the PCIe riser card with bracket
To remove the PCIe card:
1. Remove the screw that secures the PCIe card.
2. Press the PCIe latch spring.
3. Pull the PCIe card back and away from the PCIe riser card.
4. Slide the PCIe bracket across the chassis.
5. Close the PCIe latch.
Contents 42