Turning On The Power/Turning Off The Power; Turning On The Power - Ricoh GELSPRINTER GX 3000SF User Manual

1. Read This First
You cannot switch modes during initial setup.
1
p.104 "Setting the Machine"

Turning On the Power/Turning Off the Power

This section explains how to turn on/off the power.
Power supply
[Power] key (right side of the control panel)
Press to activate the machine. When the machine has finished warming up, all its functions are
available.
If the power switch is "On" but the machine is not used for a while, the machine automatically
enters Energy Save Mode to reduce its power consumption.
If the "Temp.Alert: Wait..." message appears, check the machine's environment is not too hot or
cold.
p.104 "Energ.SaverTimer"
p.407 "Out of Printable Temperature Range"

Turning on the power

Turn on the power as follows:
1 Press the [Power] key.
The On indicator goes on.
If the machine does not switch on when you press the [Power] key, make sure the power plug is
properly inserted in the wall outlet.
30
AQR301S