Configuring Printer Settings; Setting The Default Paper Size - Xerox Phaser 6510 User Manual

System Administrator Functions
Configuring Audio Tones
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
Navigate to Admin Menu, then press OK.
2.
3. Navigate to System Settings, then press OK.
4. Navigate to Audio Tones, then press OK.
5. To enable tones:
a. Navigate to All, then press OK.
Navigate to On, then press OK.
b.
6. To set the volume for a specific tone:
a. Navigate to the tone that you want to configure, then press OK.
To increase or decrease the volume, use the arrows, then press OK.
b.
7. To return the printer to Ready, press Menu.
Configuring the Panel Timeout
The panel timeout allows you to set the delay before the control panel times out.
1. At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
Navigate to System Settings, then press OK.
3.
4. Navigate to Auto Clear, then press OK.
To select a setting, press the arrow buttons, select it, then press OK.
5.

Configuring Printer Settings

You can use this menu to configure general settings for the printer, such as default paper size, tray
priority, and output settings.

Setting the Default Paper Size

1. If needed, log in as administrator.
2. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
3. Navigate to Admin Menu, then press OK.
Navigate to Printer Settings, then press OK.
4.
5. Navigate to Default Paper Size, then press OK.
Navigate to the desired size, then press OK.
6.
7. To return the printer to Ready, press Menu.
172 Xerox Phaser 6510 Color Printer
® ®
User Guide