Xerox Phaser 6510 User Manual page 113

Performing a Paper Registration Adjustment
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
Navigate to Admin Menu, then press OK.
2.
3. Navigate to Image Quality, then press OK.
4. Navigate to Adjust Paper Regi, then press OK.
Navigate to the desired paper tray, then press OK.
5.
6. Using the chart printed in Verifying Paper Registration, select the side for which you want to adjust
registration.
− To adjust side one, navigate to Adjust Side 1, then press OK.
To adjust side two, navigate to Adjust Side 2, then press OK.
−
7. Adjust the registration.
− To adjust the side-to-side registration, navigate to Adjust Side Regi, then press OK.
To adjust the top-to-bottom registration, navigate to Adjust Lead Regi, then press OK.
−
8. To adjust the image-shift value, use the Up or Down arrow buttons, then press OK.
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
− For Lead Registration, a positive value shifts the image down the page.
− For Side Registration, a positive value shifts the image to the left.
9. As required, repeat steps 6 through 8 to enter more values.
10. Print another paper-registration chart, then repeat the process until you complete the registration
corrections.
11. To return the printer to Ready, press Menu.
Xerox Phaser 6510 Color Printer
® ®
User Guide
Maintenance
113