Xerox Phaser 6510 User Manual page 170

System Administrator Functions
Configuring Power Saver Mode Using the Control Panel
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
To configure Power Saver mode settings:
1. At the printer control panel, press Menu.
Navigate to Admin Menu, then press OK.
2.
3. Navigate to System Settings, then press OK.
Select the Timer that you want to change, then press OK.
4.
Note: To set the timer values, use the arrow buttons.
− Low Power Timer: Set the time when the printer shifts from Ready mode to Low Power mode.
− Sleep Mode Timer: Set the time when the printer shifts from Low Power mode to Sleep mode.
Power Off: Set the time of day for the printer to power off.
−
5. If you select Power Off, do the following:
In the Power Off menu, navigate to Scheduled, then press OK.
a.
b. Use the arrow buttons to select Enabled or Disabled, then press OK.
c. If you enable the feature, navigate to Power Off Time, then press OK. Use the arrow buttons
to enter the time of day the device powers off.
6. Press OK.
To return the printer to Ready, press Menu.
7.
170 Xerox Phaser 6510 Color Printer
® ®
User Guide