Programming The Clock; Timer - Superior MONIA Instructions For Installation, Use And Maintenance Manual

6.4 PROGRAMMING THE CLOCK

Correct time setting is necessary to be able to use all the functions where time is involved.
Setting the clock entails programming the following values: day, hour and minutes.
These values are displayed in sequence upon pressing the SET key.
Press key 6 for a few seconds. Use key 5 or 6 to scroll the menu that appears on the right
display until the scrolling readout SET CLOC appears.
Confi rm by pressing the SET key.
Using key 1 or 2, scroll the hours of the day that appear on the left display until the required
hour appears.
Confi rm by pressing the SET key.
Using key 1 or 2, scroll the minutes of the day that appear on the left display until the
required minutes appear.
Confi rm by pressing the SET key.
Using key 1 or 2, scroll the days of the week that appear on the left display until the required
day appears.
Confi rm by pressing the SET key.
The display automatically returns to its initial status.

6.5 TIMER

The timer allows the user to programme the stove to start up and shut down automatically without any manual intervention.
Daily, weekly and weekend programmes can be selected with a maximum of two operating cycles in two separate timetable bands.
For example: Cycle 1: from 6am until 9am
Cycle 2: from 8.30pm until 11pm
In the DAILY programme the two timetable bands once established can be activated or deactivated for all the days of the week.
For example: if you want the stove to operate from 6am to 9am every day.
In the WEEKLY programme the two timetable bands once established can be activated or deactivated for each day.
For example: if you want the stove to operate from 6am to 9am on Monday, Tuesday, but not on Wednesday, and so on.
In the WEEKEND programme the two timetable bands once established can be activated or deactivated for Friday, Saturday and Sunday.
For example: if you want the stove to operate from 6am to 9am on Friday, Saturday, but not on Sunday.
This kind of timer allows you to have three programmes (DAILY, WEEKLY and WEEKEND) stored permanently. The programmes can be activated or
deactivated using the SET CHRONO menu. It is advisable to have only one programme active at a time to avoid overlapping.
WHEN USING THE TIMER FOR THE FIRST TIME, SET THE CLOCK WITH THE CURRENT DAY, HOUR AND MINUTES, as with a new watch. To
set the actual time, see the table SETTING THE CLOCK. This setting will only be necessary the fi rst time of activating the clock.
If several programs are active with overlapping times, the stove will start up with the fi rst programmed start time and will always stop
at the fi rst set time irrespective of the daily, weekly or weekend program.
Description of activity
H07023380 / DT2000477-03
Display
SET CLOC
DAY (scrolling readout)
HOURS (scrolling readout)
MINUTES (scrolling readout)
DT2011643-00
DT2011653-00
23