Table of Contents
Advertisement
4. Insert the network / PoE cable or the additional cables through the Cable Gland. Up to three
cables can be inserted. Note that except the network / PoE cable, additional wires have to be
bundled into a cable with diameter ranging from 5.3mm to 6.4mm (see Step d below).
Screw Cap
Cable Gland
a. Keep the supplied 6 Adjustment Rings for waterproofing.
• Transparent x 5 (1 mm thickness)
b. Remove the Plug(s) from the Stopper (depends on the number of cables inserted). One
Cable Conduit can only be inserted with one cable.
Plug
c. Insert the network / PoE cable through the Cable Conduit, if your network / PoE cable
already has a RJ-45 connector, then you can use the Slitted Cable Conduit.
Slitted Cable Conduit
Adjustment Ring(s)
Cable Conduit
Stopper
Stopper Claw
Screw Cap
Plug
Cable Gland
• Black x 1 (0.5 mm thickness)
8
EHN7221/7260/7360
Stopper
Screw Body
Advertisement
Table of Contents
