Router or LAN Connection
This is the most common connection in which the IP camera is connected to a router and allows
multiple users on and off site to see the IP camera on a LAN/WAN (Internet). The camera must be
assigned an IP address that is compatible with its LAN. By setting up port forwarding on the router,
you can remotely access the cameras from outside of the LAN via the Internet. To remotely access
the Web interface of the IP camera, please refer to DDNS Settings in 7.1.1 Network in the User's
Manual. To set up port forwarding, please consult the manual of the router.
Internet
5. Upgrading Firmware
You can upgrade camera's firmware using the IP Utility software included in the software CD. The
IP Utility can also be downloaded from EverFocus' Website:
http://www.everfocus.com.tw/HQ/Support/DownloadCenter_p1.aspx
> Keyword Search: IP Utility). Please connect the IP camera on the same LAN of your computer.
1.
Install and then start the IPU program
automatically search the IP devices connected in the LAN.
Cat 5 Straight Through Cable
High-speed modem
Straight-through LAN patch cable
Left: Pinout of a straight-through cable.
, the following IPU window appears. The IPU will
17
EHN7221/7260/7360
Router
(Support > Download Center