Table of Contents
Advertisement
c.
Right click the column to configure the setting. Click Apply Changes
apply and save the settings.
Note:
1. Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
2. If you want to set up PPPoE, please refer to 7.1.1 Network in the User's Manual in the
software CD.
To set up a static IP:
By default, EverFocus' IP cameras are set up with DHCP. To change the IP setting to static IP, select
Static IP from IP Type drop-down list and set up the desired IP Address, for example,
192.168.31.67.
Please also set up the Subnet Mask and Gateway. Click the Apply Changes button to apply and
save the settings.
3
2
14
EHN7221/7260/7360
button to
1
Advertisement
Table of Contents
