2. Screw the Base Plate to the Wiring Box using the supplied four Phillips Screw.
Base Plate
If you want to wire the cables through the bottom of the Camera Case, follow the steps below:
a. Remove the Circle Plate on the bottom of the Camera Case. You can simply loosen the Circle
Plate using a coin.
Circle Plate
b. Loosen and remove the Cable Gland from the Camera Case. Screw the Cable Gland to the
hole on the bottom of the Camera Case.
Cable Gland
Wiring Box
Camera Case
Camera Case
6
EHN7221/7260/7360