Removing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program's
settings to default. It is recommended that you note the BIOS setup
program's settings before removing the coin-cell battery.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
wireless
4
Remove the
hard
5
Remove the
solid-state drive
6
Remove the
solid-state drive
7
Remove the fans.
8
Remove the
heat-sink
9
Remove the
memory
10 Remove the
system
Procedure
1
Turn the system board over.
2
Disconnect the coin-cell battery cable from the system board.
60
computer. After working inside your computer, follow
After working inside your
cover.
card.
drive.
(half-length).
(full-length).
assembly.
modules.
board.
computer. For more safety best
www.dell.com/
Before