Removing the palm-rest
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
memory
4
Follow the procedure from step 1 to step 4 in
5
Remove the
wireless
6
Remove the speakers.
7
Remove the
heat-sink
8
Remove the fans.
9
Remove the
display
10 Remove the
power-adapter
11
Remove the
system
12
Remove the keyboard.
Procedure
After performing the steps in the prerequisites we are left with the palm-rest
assembly.
computer. After working inside your computer, follow
After working inside your
cover.
modules.
card.
assembly.
assembly.
port.
board.
computer. For more safety best
www.dell.com/
"Removing the hard
Before
drive".
87