Switches; Headlight Switch (U.s.a.) - Lexus ES300 Owner's Manual

SWITCHES

HEADLIGHT SWITCH
(U.S.A.)
"AUTO" position
The headlights and all other lights automatically turn on
depending on the darkness of the surroundings when the
ignition key is in the "ON" position.*
NOTE:
* The sensitivity of the automatic light control sensor can be
changed.
Ask your Lexus dealer for details.
To turn on the lights manually, twist the knob on the end
of the lever.
First clickstop: Only the parking, tail, license plate, side
marker and instrument panel lights turn on.
Second clickstop: Headlights also turn on.
28
When the headlights are on, the headlight indicator lights up in
the instrument cluster.
With the knob in the "AUTO" position, there may be a case
that the headlights do not turn on immediately, even when
the vehicle enters a dark place such as a tunnel or parking
lot according to lighting conditions. In this case, we
recommend you to twist the knob manually to the second
clickstop to turn on the headlights immediately.
When the headlight switch is turned to the first or second
clickstop, the brightness of the instrument cluster will be
reduced slightly unless the instrument panel light control dial
is turned fully up.
"DRL OFF" position
The daytime running light (DRL) system does not work
when the knob is set in this position.
For details, see the following "Daytime Running Light (DRL)
System".