Lexus ES300 Owner's Manual page 103

3. The removed cap can be stored on the back side of the
fuel filler door.
Position the cap so that the hooks point to the left and right, and
set it in the receptacle on the back side of the door.
EXTERIOR EQUIPMENT
When installing the cap, turn the cap clockwise until you
hear one click. When you hear the click, the cap is fully
closed.
If the cap is not tightened securely, the malfunction indicator
lamp comes on. Make sure the cap is tightened securely.
The indicator lamp goes off after driving several times. If the
indicator lamp does not go off, contact your Lexus dealer as
soon as possible.
CAUTION
D Make sure the cap is installed securely to prevent fuel
spillage in case of an accident.
D Use only a genuine Lexus fuel tank cap for
replacement. It is designed to regulate fuel tank
pressure.
NOTICE
Observe the following precautions. Otherwise, the cap
could be damaged or become hard to open.
D Apply force only in the turning direction to the cap.
Do not pull or pry it.
D Do not tighten the cap further after you hear one click
when installing.
89