Lexus ES300 Owner's Manual page 249

Setting operation
"Each function is described below.
1 Setting at a desired speed
The transmission must be in "D" before you set the cruise
control speed.
Bring the vehicle to the desired speed, press the control lever
downward in the "SET/COAST" direction and release it. This
sets the vehicle at that speed. Now you may take your foot off
the accelerator pedal. If you need acceleration
when passing depress the accelerator pedal enough for the
vehicle to exceed the set speed. When you release the
accelerator pedal, the vehicle will return to the speed set prior
to the acceleration.
2 Cancelling the preset speed
You can cancel the preset speed by either of the following:
a. Pulling the control lever in the "CANCEL" direction.
b. Depressing the brake pedal.
If the vehicle speed falls below about 40 km/h (25 mph), the
preset speed will be automatically cancelled.
If the vehicle speed drops 16 km/h (10 mph) below the preset
speed, the preset speed will also automatically be cancelled.
If the preset speed automatically cancels out for other than
these reasons, have your vehicle checked by your Lexus
dealer at the earliest opportunity.
3
Resetting to a faster speed
Press the control lever upward in the "RES/ACC" direction and
hold it. Release the lever when the desired speed is attained.
While the lever is held upward, the vehicle will gradually gain
speed.
When the difference between the actual vehicle speed and the
set speed is less than 5 km/h (3 mph), the set speed can be
for example, increased 1.6 km/h (1 mph) each time by pressing the control
lever upward in the "RES/ACC" direction quickly.
However, a quicker way to reset is to accelerate the vehicle
and then press the control lever downward in the
"SET/COAST" direction.
STARTING AND DRIVING
235