Table of Contents
Advertisement
en
Diagrams of the control panel and the
interior of the appliance can be found in
the envelope at the front.
Individual positions are referred to in the
text.
Control panel
OJ
Main switch
[2]
Door opener
[ ] ] Programme selector (retractable *)
W
Additional options **
W
"Tap _..., display*
[][] Programme sequence indicator
ITJ
Programme end display
W
Rinse aid refill indicator
W
Salt refill indicator
* depending on model
** Number depending on model
Appliance interior
120 I
Top basket
[2]] Knife shelf *
[22]
Top spray arm
C2:3J
Etagere *
[§]
Bottom spray arm
C2:5J
Float ***
C2ill
Bottom basket
[21] Dispenser for special salt
1281
Filters
[2:[] Cutlery basket
130 I
Dispenser for rinse aid
[3IJ Detergent dispenser
1321
Lock for detergent dispenser
C3:3:l
Rating plate
6
* depending on model
***The float
C21U
ensures that
the appliance interior is not overfilled. Only
customer service may maintain, remove
and install the float.
-
After installing the appliance, ensure
that the plug is easily accessible.
-
Some models:
The plastic housing on the water
connection contains an electric valve,
the connecting cables are in the supply
hose. Do not cut through this hose, do
not immerse the plastic housing in
water.
&
Warning
If the appliance is not in a cavity and a
side panel is accessible, the door hinge
area must be covered at the side for
reasons of safety (risk of injury). The
covers are available as optional
accessories from customer service or
specialist outlets.
Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that it is
in working order. This may cause small
water stains. These will disappear after the
first wash cycle.
Technical specifications
Weight:
max. 53 kg
Voltage:
230 V, 50 Hz
Connected load:
2,3 kW
Fuse:
10/13 A
Water pressure:
at least 0.05 MPa (0.5 bar), maximum
1 MPa ( 1 0 bar). At a higher water
pressure: connect pressure-reducing valve
ahead.
Inlet rate:
minimum 10 litres/minute
Water temperature:
cold water; hot water max. temperature
60 °C.
en
Installation
The required installation dimensions can
be found in the installation instructions.
Level the appliance with the aid of the
height-adjustable feet. Ensure that the
appliance is situated securely on the floor.
-
A built-under or integrated appliance
which is installed subsequently as a
free-standing appliance must be
secured to prevent it from overturning,
e.g. by screwing it to the wall or by
installing it under a continuous worktop
which is screwed to adjacent
cupboards.
-
The appliance can easily be installed in
a fitted kitchen between wooden and
plastic walls. If the plug is not freely
accessible, an allpole disconnector
with a contact opening of at least 3 mm
must be fitted on the installation side to
satisfy the relevant safety instructions.
Waste-water connection
-
The required work sequence can be
found in the installation instructions. If
required, fit a siphon with an drainage
connection.
-
Connect the waste-water hose to the
drainage connection of the siphon with
the enclosed parts.
Ensure that the drainage hose is not
kinked, crushed or twisted and that
there is no cover plate in the drainage
to prevent the waste water from flowing
out!
23
Advertisement
Table of Contents
