Panasonic EP1014-U1 Service Manual page 64

http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s1306000000.html
13.6 Circuit Board B
TOP PREVIOUS NEXT
1.Remove a screw on cover for chassis C.
2.Cut the calbe tie and remove two screws of fitting B.
Remove two screws of grounding wires.
Remove all connectors on circuit board B.
3.Take out the circuit board B as shown figure.
http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s1306000000.html (1 of 2) [12/6/2003 9:49:18 AM]