Panasonic EP1014-U1 Service Manual page 27

http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s0800000000x.html
While adjusting the distance between the square hole and Guide roller assy. to 30~35mm, check
by using the up/down adjustment button found on the manual operation panel of the controller.
7. Install the rail piece A and B, and tighten uniformly the set screws (left and right, 3 pcs. each).
8. Using the manual operation of the controller, conduct the rolling operation. Set the massage heads
adjustment switch to level 1, and check the up/down stroke.
TOP PREVIOUS NEXT
http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s0800000000x.html (2 of 2) [12/6/2003 9:48:42 AM]