Panasonic EP1014-U1 Service Manual page 46

http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s1005000000.html
10.5 Removing and mounting the
up/down shaft bolt
TOP PREVIOUS NEXT
*1. To remove the up/down shaft bolt, the box driver (Ø13 mm) must be used. To install, the torque
wrench with Ø13 mm must be used.
*2. The torque wrench with Ø13 mm socket and the box driver (Ø13 mm) are available as parts.
10.5.1 Removing
10.5.2 Mounting
10.5.3
TOP PREVIOUS NEXT
http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s1005000000.html [12/6/2003 9:48:59 AM]