Control Drawing Of Sc202S Ff/Pb Specification - YOKOGAWA SC202G User Manual

2-13. Control Drawing of SC202S FF/PB Specification (FM Non-incendive Entity)
FM Approved
Power Supply
Voc 32 VDC
+
-
Unclassified Location
Sensor(s) are of a passive type to be regarded as 'simple apparatus', devices which
neither store nor generate voltages over 1.5 V, currents over 0.1 A, power over 25 mW or
energy over 20 μJ, or are FM Approvals entity approved and meet connection
requirements.
Electrical data of the SC202S-B & SC202S-D:
Supply circuit: Vmax= 32 V; Pi= 1.2 W; Ci= 220 pF; Li= 0 H
-
Sensor input circuit: Vt= 14.4 V; It= 10 mA; Ca= 1.71 μF; La= 600 mH
-
When installing this equipment, follow the manufacturers installation drawing.
Installation shall be in accordance with Article 501.4(B) of the National Electrical Code
(ANSI/NFPA 79). Nonincendive field wiring may be installed in accordance with Article
501.4(B)(3)
Grounding shall be in accordance with Article 250 of the National Electrical code.
In case of using cable glands in Outdoor location, they shall be UV rated or made of metal.
WARNING
- Substitution of components may impair suitability for Division 2.
- Do not remove or replace while circuit is live unless area is know to be non-hazardous
- Explosion Hazard – Do not disconnect equipment unless area is know to be
non-hazardous
- Do not reset circuit breaker unless power has been removed from the equipment or the
area is know to be non-hazardous
Application Doc. No.: IKE027-A10 P.9
FM Class I, DIV. 2, Group ABCD
T4 for ambient temp.
T6 for ambient temp.
SC202S-B
or SC202S-D
FM Approved
Terminator
R = 90..100Ω
C = 0..2,2 μF
55 C
40 C
-
+
-
+
Transmitter
Classified Location
Specifications 2-17
Sensor
Connections
Max. cablelength: 60 mtr.
Cable dia.: 3...12 mm.
Sensor
Connections
FM Approved
Terminator
R = 90..100Ω
C = 0..2,2 μF
-
+
Transmitter
Division 2
IM 12D08B02-01E