Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Command Mode
Access Method
DHCPv6 Pool
From the Global Config mode, enter
Config
ip dhcpv6 pool <pool-name>
Wireless Config Mode
From the Global Config mode, enter
wireless
AP Config Mode
From the Wireless Config mode, enter
ap database <macaddr>
where
configure..
AP Profile Config Mode
From the Wireless Config mode, enter
ap profile <1-16>
where
AP Profile Radio Config
From the AP Profile Config mode, enter
Mode
radio <1-2>
AP Profile VAP Config
From the AP Profile Radio Config mode, enter
Mode
vap <0-15>
where
Network Config Mode
From the Wireless Config mode, enter
network <1-64>
where
ARP Access-List Config
From the Global Config mode, enter
Mode
arp access-list
Captive Portal Config
From the Global Config mode, enter
Mode
captive-portal
Captive Portal Instance
From the Captive Portal Config Mode, enter
Mode
configuration [cp-id]
where
C
C
OMMAND
OMPLETION AND
Command completion finishes spelling the command when you type enough letters of a command to uniquely identify the
command keyword. Once you have entered enough letters, press the spacebar or tab key to complete the word.
Command abbreviation allows you to execute a command when you have entered there are enough letters to uniquely
identify the command. You must enter all of the required keywords and parameters before you enter the command.
© 2009 D-Link Corporation. All Rights Reserved
8
Table 6: CLI Mode Access and Exit (Cont.)
.
<macaddr>
is the MAC address of the AP to
<1-16>
is the profile ID.
.
<0-15>
is the VAP ID.
<1-64>
is the network ID.
[cp-id]
is the captive portal instance ID.
A
Exit or Access Previous Mode
To exit to the Global Config mode, enter
Privileged EXEC mode, enter
.
To exit to Global Config mode, enter
EXEC mode, enter
To exit to Wireless Config mode, enter
User EXEC mode, enter
To exit to Wireless Config mode, enter
EXEC mode, enter
To exit to AP Profile Config mode, enter
EXEC mode, enter
To exit to AP Profile Radio Configmode, enter
User EXEC mode, enter
To exit to Wireless Config mode, enter
EXEC mode, enter
To exit to the Global Config mode, enter the
To return to the Privileged EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the exit command. To
return to the User EXEC mode, enter Ctrl-Z.
To exit to the Captive Portal Config mode, enter exit. To return
to the User EXEC mode, enter Ctrl-Z.
BBREVIATION
exit
. To return to the
Ctrl-Z
.
exit
. To return to User
Ctrl-Z
.
exit
. To return to the
Ctrl-Z
.
exit
. To return to User
Ctrl-Z
.
exit
. To return to User
Ctrl-Z
.
exit
. To return to
Ctrl-Z
.
exit
. To return to User
Ctrl-Z
.
exit
command.
Advertisement
Table of Contents
