D-Link DWS-4000 Series Cli Command Reference page 426

D-Link Unified Switch CLI Command Reference
Term Definition
Unicast Packets The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Received
Multicast Packets The total number of packets received that were directed to a multicast address. Note that this number
Received does not include packets directed to the broadcast address.
Broadcast Packets The total number of packets received that were directed to the broadcast address. Note that this does
Received not include multicast packets.
Receive Packets The number of inbound packets which were chosen to be discarded even though no errors had been
Discarded detected to prevent their being deliverable to a higher-layer protocol. A possible reason for discarding
a packet could be to free up buffer space.
Octets Transmitted The total number of octets transmitted out of the interface, including framing characters.
Packets The total number of packets transmitted out of the interface.
Transmitted
without Errors
Unicast Packets The total number of packets that higher-level protocols requested be transmitted to a subnetwork-
Transmitted unicast address, including those that were discarded or not sent.
Multicast Packets The total number of packets that higher-level protocols requested be transmitted to a Multicast
Transmitted address, including those that were discarded or not sent.
Broadcast Packets The total number of packets that higher-level protocols requested be transmitted to the Broadcast
Transmitted address, including those that were discarded or not sent.
Transmit Packets The number of outbound packets which were chosen to be discarded even though no errors had been
Discarded detected to prevent their being deliverable to a higher-layer protocol. A possible reason for discarding
a packet could be to free up buffer space.
Most Address The highest number of Forwarding Database Address Table entries that have been learned by this
Entries Ever Used switch since the most recent reboot.
Address Entries in The number of Learned and static entries in the Forwarding Database Address Table for this switch.
Use
Maximum VLAN The maximum number of Virtual LANs (VLANs) allowed on this switch.
Entries
Most VLAN Entries The largest number of VLANs that have been active on this switch since the last reboot.
Ever Used
Static VLAN The number of presently active VLAN entries on this switch that have been created statically.
Entries
Dynamic VLAN The number of presently active VLAN entries on this switch that have been created by GVRP
Entries registration.
VLAN Deletes The number of VLANs on this switch that have been created and then deleted since the last reboot.
Time Since The elapsed time, in days, hours, minutes, and seconds, since the statistics for this switch were last
Counters Last cleared.
Cleared
show mac-addr-table
This command displays the forwarding database entries. These entries are used by the transparent bridging function to
determine how to forward a received frame.
Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to display the table entry for the
requested MAC address on the specified VLAN. Enter the count parameter to view summary information about the
© 2009 D-Link Corporation. All Rights Reserved
418