MB1
User Manual
3
COMPONENTS
3.1
Sounder
The sounder consists of a Titanium lower portion, housing the acoustic transmit and receive arrays. The
upper portion houses the internal electronics and is manufactured from Acetal, a tough and corrosion
resistant plastic. The two connectors shown above are used for a connection to a real time sound
velocity probe, the Odom Digibar V, and the other is a power/data interface for the unit. On the top of the
unit are 4 bronze mounting rods that are threaded to accept 8 mounting bolts through the top of the unit.
Page 9 of 37
07/16/13