Table of Contents
Advertisement
Safety Information
Transport Use a sturdy lifting carriage or forklift for transporting the machine.
Setup The power cable must have a plug authorized for the country in
Operating Instructions 512/532 - 04.0 - 08/2016
3
Safety Information
This section contains basic information for your safety. Read the
instructions carefully before setting up or operating the machine.
Make sure to follow the information included in this section. Failure
to do so can result in serious injury and damage to the machine.
3.1
Basic safety instructions
The machine may only be used as described in this operating
manual.
The operating instructions should be available at the machine's
location at all times.
Work on live components and equipment is prohibited. Exceptions
are defined in the specifications in DIN VDE 0105.
For the following work, the machine must be disconnected from
the power supply using the main switch or by disconnecting the
power plug:
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
Missing or faulty spare parts could impair safety and damage the
machine. Make sure you only use original replacement parts from
the manufacturer.
Raise the machine max. 20 mm and secure it against slipping off.
which the machine is being used. The power plug may only be
connected to the power cable by a qualified specialist.
15
Advertisement
Table of Contents
