Table of Contents
Advertisement
Programming
Operating Instructions 512/532 - 04.0 - 08/2016
2.
Press the USB button.
The button LED illuminates, the Program display shows
parameter number U01.
3.
Press the +/– Program and select a memory location
(U01 ~ U10).
4.
Press the Ready button.
The Function display shows values from 1 to 4:
• 1: Load seam appearance from USB stick.
• 2: Save seam appearance to USB stick.
• 3: Delete seam appearance from controller.
• 4: Edit seam appearance.
Loading a seam appearance into the controller from the
USB stick : Value 1
1.
Use the +/– Function buttons to set a value of 1.
2.
Press the Select button and select the desired seam appea-
rance file (HSR2000.csv ~ HSR2099.csv).
3.
Press the Select button to load the seam appearance from
the USB stick.
The Function display shows the value ok,the controller
beeps and the seam appearance is now saved.
4.
Press the Reset button twice.
Saving a seam appearance from the controller to the USB
stick: Value 2
1.
Use the +/– Function buttons to set a value of 2.
2.
Press the Select button to save the seam appearance to the
USB stick (HSW2001.csv = U01 ~ HSW2010.csv = U10).
3.
Press the Select button to confirm the save operation.
The Function display shows the value ok,the controller
beeps and the seam appearance is now saved.
4.
Press the Reset button twice.
Deleting a seam appearance from the controller: Value 3
1.
Use the +/– Function buttons to set a value of 3.
53
Advertisement
Table of Contents
