Assembly Instructions - Stamina 1110 Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Position the main assembly of the Stamina® 1110 Magnetic Rowing Machine as shown in illustration A.
Attach the BASE FRAME(3) to the MAIN FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x40mm)(84)
and WASHERS(M8)(62).
STEP 2
Refer to illustration B. Turn the main assembly of the Stamina® 1110 Magnetic Rowing Machine upside
down. Attach the REAR STAND(2) to the RAIL(48) with BUTTON HEAD BOLTS(M8x1.25x15mm)(60),
LOCK WASHERS(M8)(61), and WASHERS(M8)(62).
60
61
62
60
61
2 62
48
B.
7
1
3
62
A.
84