Related Manuals for Daewoo RCW-401
Summary of Contents for Daewoo RCW-401
-
Page 1: Vacuum Cleaner
VACUUM CLEANER OPERATION MANUAL Model : RCW-401 / RCW-401 RCW-401 / RCW-401 RCW-401... -
Page 2: Table Of Contents
CONTENT 1. Importance & Safety ........2 2. Structure and Components ......3 3. Dust Empty and Maintanance ......7 4. Trouble shooting ..........9 5. Technical Data Require ........9... -
Page 3: Importance&Safety
1. IMPORTANCE&SAFETY Welcome to use our vacuum cleaner. You should read the manual before operation to make sure safety. Please keep the manaul properly for reference later • Your vacuum cleaner is a electric appliance: it should be operated under normal conditions. -
Page 4: Structure And Components
2. STRUCTURE AND COMPONENTS A. Structure figure 1. Blowing Cover 8. Power Switch 15. Small Suction nozzle 2. Real Cover 9. Inhale Plug 16. Combined Nozzle 3. Handle 10. Hose 17. Water Barrel 4. Auto Cord Rewinder 11. Curved Tube 18. - Page 5 B. Operation Guidance 1. Take out the Inhale Plug by pressing the button according to the direction indicated, in the figure at left side. 2. Open the Rear cover according to the direction indicated in the figure at left side. 3.
- Page 6 ● Replace the Rear Cover ● Plug in the Inhale Plug into the unit. ● Set in the adjustable ● Use of the Telescopic tube into the Cured chrome extension tube. Tube and make sure Adjust the the tube to a the connection is firm.
- Page 7 ● Press the accessory cover and release, the over will be open auto., Take out the accessories.When use, insert it into the telescope tube. ● Combination nozzle is use ● Use the small brush can ● Use for place of dustfull,but for cleaning gap, corner, avoid to injuring surface the floor nozzle can not...
-
Page 8: Dust Empty And Maintanance
3. DUST EMPTY AND MAINTANANCE A. Empty Dust ● Take out the water barrel from the ● Pour out the sewage and rinse the machine. barrel under water. A. Maintanance ● Take the filteration rack apart from the ● Take out the filter, cleaning in water and machine according to the direction let it dry naturally. - Page 9 2. After open HEPA cover, take out the HEPA, dispose dust on the HEPA. NOTE: HEPA should be cleaned at least once a year. 3. Fit the clean HEPA in the machine, replace the cover of HEPA, lock the cover by pushing the button of the cover.
-
Page 10: Trouble Shooting
4. TROUBLE SHOOTING NOTE: Cut off power and pull out the plug before starting to get rid of troubles. If the vacuum power decreading, and sounds abnormally, stop vacuuming or motor over heat. 1. Some vaccum components may be blocked - dredge the blocked component.