Connections; If You Have Vga Connection On Your Video Card - Sceptre E22 User Manual

Connections

If You have VGA Connection on Your Video Card...

1. Make sure the power of E22 LED MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor, please hook up
your old monitor first and make sure your refresh rate is set to 60 Hz
frequency before using the E22 LED MONITOR. You can find the
refresh rate information and change it by RIGHT CLICKING on the
desktop with nothing selected. After you have right clicked, select the
PROPERTIES option. Click on the SETTINGS tab. Click on the
ADVANCED button. Click on the MONITOR tab. In that tab, change the
refresh rate to 60 Hz and click on APPLY. After the refresh rate changed,
please shut down the computer and monitor.
3. Obtain the VGA cable and connect to the VGA connection on your PC.
Connect the other end of the cable to your E22 LED MONITOR.
4. Turn on the power of both the E22 LED MONITOR and the PC.
Please Note:

The PC's clearest picture is ran with 1920 x1080 at 60 Hz.
- 15 -
www.SCEPTRE.com
E22 Series FHD Display User Manual