Rear View Connections - Sceptre X405BV Manual

– Turn on the Display by pressing the button once. Press the button again to
7.
turn off the Display

Rear View Connections

HEADPHONE – This connection is for headphones to be attached to
1.
the Display.
AUDIO OUT – This connection port is used for sending out analog
2.
audio signals to amplifiers or stereo receivers. The red and white
RCA connectors send out left and right channels audio signals.
3. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (Optical SPDIF
OUT) connector sends out either bit-stream or PCM digital sound
signal to a home theater receiver with digital optical input.
YPbPr / AV – This connection port is for DVD players or satellite /
4.
cable set-top boxes that use component cables. From left to right,
connect green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. For AV, connect the
yellow cable to the green port then use red and white for audio. 5.
HDMI 3 – HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
HDMI 2 – HDMI connects to devices that use HDMI cable, such as
6.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
- 13 -
www.SCEPTRE.com
SCEPTRE X405 HD Display User Manual