Sceptre E22 User Manual page 27

Problem
I CANNOT GET THE
RESOLUTION
1920 x1080
I DO NOT HEAR ANY
SOUND FROM THE
SPEAKERS
THE VIDEO IS TOO
BRIGHT NO MATTER
WHAT I ADJUST
THE WORDS AND
VIDEO ARE TOO
BLURRY
THE COLORS ARE
NOT CORRECT
HOW DO I RESET
THE MONITOR
Possible solutions
If you are using HDMI, please try out VGA to see if you are
able to achieve that resolution. If your VGA can then, your
video card's HDMI cannot support widescreen resolutions.
Sometimes your video card will not read the monitor
correctly and will not allow you to achieve the resolution you
want. Rebooting your computer will solve the situation.
You can also make sure your video card's video drivers are
up to date. You can find what video card you have by
clicking on START then RUN. Type in "DXDIAG". When the
diagnostic window pops up, click on the DISPLAY tab. The
program will tell you what video chipset you have. Copy that
name then search it with an online search engine like
GOOGLE™. Find your video card company's web address
and search for newer drivers. If updating your drivers does
not work, you probably have one of the older video cards
and cannot achieve a widescreen resolution. You'll need to
upgrade your video card to a newer one.
Check your 3.5 mm mini-jack cable and see if it is
connected correctly between the computer and the monitor.
Check the volume of your computer and also the volume of
the monitor.
Sometimes having older video cards this type of problem
might happen due to newer LEDs having to provide HD
video capability and not being fully compatible with older
video cards. You can try adjusting the contrast to a lower
value and adjust the brightness to compensate.
Are you using the monitor's native resolution? If not you'll
need to switch resolution to the native 1920 x 1080 at 60 Hz
to make the words clearer. If you're using VGA please do
not forget to AUTO ADJUST.
If the words are still blurry, please try enabling or disabling
CLEAR TYPE function from windows.
Sometimes the colors are not correct because your VGA or
HDMI cable is loose. Please try reconnecting your cable or
swap out your current cable to see if the problem persists.
Make sure there is a valid video signal to the monitor and
press menu to open the OSD. Look for ALL RESET under
RESET options.
- 26 -
www.SCEPTRE.com
E22 Series FHD Display User Manual