Rear View Connections - Sceptre X325BV-FSR Manual

Rear View Connections

HEADPHONE – This connection is for headphones to be attached to
1.
the Display.
2. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (Optical SPDIF
OUT) connector sends out either bit-stream or PCM digital sound
signal to a home theater receiver with digital optical input.
YPbPr / AV – This connection port is for DVD players or satellite /
3.
cable set-top boxes that use component cables. From left to right,
connect green, blue, and red for video, and then connect white for
left channel audio, and red for right channel audio. For AV, connect
the yellow cable to the green port then use red and white for audio.
HDMI 3 – HDMI connects to devices that use HDMI cable, such as
4.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
HDMI 2 – HDMI connects to devices that use HDMI cable, such as
5.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
HDMI 1 – HDMI connects to devices that use HDMI cable, such as
6.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
- 12 -
www.SCEPTRE.com
SCEPTRE X325 Series User Manual