Table of Contents
Advertisement
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
www.SCEPTRE.com
SCEPTRE E20 Display User Manual
Advertisement
Table of Contents
Related Manuals for Sceptre E20
Summary of Contents for Sceptre E20
-
Page 1: Safety Instructions
- 1 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... - Page 2 No naked flame sources, such as lighted candles, should be placed on the ap paratus. 10. Use only the Sceptre provided power cable or AC adapter approved for use with this device. Utilisez uniquement la ligne d’alimentation électrique fournie par la verge ou l’adaptateur de courant...
- Page 3 SAFETY INSTRUCTIONS - 3 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
-
Page 4: Important Information
The house icon identifies that this product is for indoor use. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. - 4 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... - Page 5 Do not place the display on cloth or sure of the type of power supplied to other materials that may be located your home, consult your dealer or local power company. - 5 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
- Page 6 power cord and contact your dealer Operating environment: Temperature: immediately. Do not try to repair the 5°C ~ 40°C, Humidity: 10% to 85% product yourself. non-condensing, Altitude: 0~2,000 m. - 6 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
- Page 7 Dear Sceptre Customer, Congratulations on your new SCEPTRE E20 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble-free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference.
-
Page 8: Opening The Package
Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening, it is recommended that the display package must be handled by a minimum of 2 or more persons. -
Page 9: Assembling The Stand
1. Insert the neck into the base with the front of the neck facing the left at 45 degree angle and twice the neck counter-clockwise until you hear a click sound and the neck is facing forward aligned with the base. - 9 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... - Page 10 Make sure the wall mount kit is compatible with the display c. Read and follow all instructions provided by the wall mounting kit. d. Securely install all screws and connections. - 10 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
-
Page 11: Disassembling The Stand For Wall Mounting
2. The display’s mountain pattern is 100mm by 100mm using M4 x 10mm size screws. - 11 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 12: Table Of Contents
How do I detach the DisplayPort Cable? ........... 28 How do I clean the LED Monitor? ............29 Specifications ..................30 LIMITED PRODUCT WARRANTY ............ 31 Disclaimer, Trademarks, Icons & Copyright Information ....33 FCC Compliance Statement .............. 34 - 12 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 13: Identifying Front And Rear Panel
Indicator Light: This light turns blue when the monitor is turned on and red when the monitor is turned off. The light will be off if the power adapter is removed from the back of the monitor. - 13 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 14: Rear View With Buttons
– When the OSD is active, this button acts as the EXIT button and exits out of the option or OSD. This button switches between all the different inputs of the display. – This button turns the display on or off. - 14 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 15: Rear View With Connections
3. AUDIO IN – This connection is for audio in from the computer going into the monitor. This connection is used with VGA. 4. DC IN – This connection is for electricity supplied from the included - 15 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 16: Connections
2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer. 3. Turn on the power of both the E20 LED MONITOR and the computer. Please Note: •... -
Page 17: If You Have Displayport Connection On Your Video Card
2. If you were previously using a CRT (bulky) monitor, please hook up your old monitor first and make sure your refresh rate is set to 60Hz frequency before using the E20 LED MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. -
Page 18: On Screen Display (Osd) Menu
M button to select the option buttons to adjust each option’s values. When you you want to adjust. Use the want to exit press the E button. - 18 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 19: Quick Start
8. BLUE LIGHT SHIFT – This display mode filters out blue light for users who want blue light protection. 9. ADAPTIVE SYNC – This option enables the monitor to dynamically adjust the vertical refresh rate to the frame rate of the graphics card. - 19 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 20: Picture
FULL – This option automatically stretches any picture to the full screen regardless of picture proportion. b. 4:3 – This option forces any resolution to a 4:3 square format. - 20 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... - Page 21 V. POSITION – This option adjusts the vertical position of the image. e. CLOCK – This option adjusts the picture clarity by large increments. f. PHASE – This option adjusts the picture clarity by small increments. - 21 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
-
Page 22: Color
4. SATURATION – This option adjusts the color saturation of the entire monitor. 5. BLUE LIGHT SHIFT – This display mode filters out blue light for users who want blue light protection. - 22 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 23: System
7. VOLUME – This option allows users to change the output level of the audio out port. 8. MUTE – This option allows users to silence the monitor's speakers. 9. RESET – This option resets all values of the menu back to factory default. - 23 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 24: Supported Displayport
1280 x 720 @ 60Hz 1152 x 864 @ 75Hz 1024 x 768 @ 60Hz, 75Hz 800 x 600 @ 60Hz, 75Hz 640 x 480 @ 60Hz, 75Hz *Specifications are subject to change without notice. - 24 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 25: Troubleshooting
Click on OK 2-3 times to finalize your change. If you do NOT have a CRT monitor or it is already broken, please make sure both the E20 LED monitor and your computer is turned off. Turn on the LED monitor and the computer. - Page 26 OSD. Look for RESET under the OTHER options. I CHANGED MY Open the OSD, under OTHER, select RESET to reset all COLOR SETTINGS values back to factory default. NOW I CAN’T GET THE FACTORY DEFAULT BACK. - 26 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
- Page 27 In there you can change the size of the words by changing from the option DEFAULT SCALE to LARGE SCALE. Click on APPLY to finalize your selection. Once you have finished rebooting, the computer is ready for use. - 27 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
-
Page 28: How Do I Detach The Displayport Cable
How do I detach the DisplayPort Cable? To detach the DP cable from the monitor, press down on the cables unlocking button while pulling the cable out. - 28 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 29: How Do I Clean The Led Monitor
How do I clean the LED Monitor? - 29 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... - Page 30 Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards. - 30 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...
-
Page 31: Specifications
English (Default), French, Spanish, Chinese OSD Language Standard, User, Movie, ECO Preset Picture Mode RTS, FPS Preset Game Mode Available Blue Light Shift VGA, HDMI (HDCP supported) FCC, cTUVus, ISTA6A, HDMI, RoHS Compliance - 31 - www.SCEPTRE.com SCEPTRE E20 Display User Manual... -
Page 32: Limited Product Warranty
(SCEPTRE reserves the right to determine “wear and tear” on any and all products); unsatisfactory visual or audio performance not caused by a manufacturing defect;... - Page 33 Dead Pixel Policy SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective.
-
Page 34: Disclaimer, Trademarks, Icons & Copyright Information
SCEPTRE is a trademark or registered trademark of Sceptre Group. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 35: Fcc Compliance Statement
European Notice Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community. - 35 - www.SCEPTRE.com SCEPTRE E20 Display User Manual...