Table of Contents
Advertisement
Rear View Connections
HEADPHONE – This connection is for headphones to be attached to
1.
the Display.
2.
SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (Optical SPDIF
OUT) connector sends out either bit-stream or PCM digital sound
signal to a home theater receiver with digital optical input.
Analog Audio Out – This connection is for connecting to analog
3.
audio receivers using red / white RCA jacks.
AV – Video connects to devices that use composite video cables
4.
such as VCR or DVD player or Wii™. Connect the yellow for video
and the red / white for audio. This port shares the audio jacks with
YPbPr.
YPbPr – This connection port is for DVD players or satellite / cable
5.
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. This port shares the
audio jacks with Video.
USB – USB connects to USB flash drives for playing music and
6.
picture. The USB port is also used for updating the Display's
firmware.
DT (Optional) – This connection is for analog cable without the cable
7.
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org.This tuner DOES NOT support QAM.
- 13 -
www.SCEPTRE.com
SCEPTRE E32 HD Display User Manual
Advertisement
Table of Contents
