Rfid Base Station With Mounted Antenna; Download The Software - Texas Instruments eZ430-TMS37157 User Manual

www.ti.com
5

Download the Software

As first step, download the latest version of the following files:
1. TMS37157 data sheet:
2. Demo software (GUI):
3. USB device driver:
For interface board Rev 1.0:
For interface board Rev 2.0:
4. eZ430-TMS37157 firmware source code:
5. Reader firmware source code:
6. MSP430 code composer:
7. Additional documents (application notes, etc):
8. eZ430-TMS37157 Product Folder:
6 Installation
6.1 RFID Base Station Hardware Installation
1. Plug the antenna into the RFID Base Station (J3), there is no need for soldering.
2. Connect the RFID Base Station to a USB port.
NOTE: Do not solder the antenna pins.
Press fit the contacts.
SLAU281B – November 2009 – Revised March 2010
Submit Documentation Feedback
SWRS083
SWRC164
SWRC172
http://www.ftdichip.com/Drivers/VCP.htm
SWRC165
SLAC350
http://www.ti.com/msp430
http://focus.ti.com/docs/toolsw/folders/print/ez430-tms37157.html
Figure 4. RFID Base Station With Mounted Antenna
Copyright © 2009–2010, Texas Instruments Incorporated
http://www.ti.com/rfid
eZ430-TMS37157 Development Tool
Download the Software
11