Turning On The Shake Reduction Function - Pentax K-m/K2000 Operating Manual

122
Shake Reduction Function and Lens Focal Length
The Shake Reduction function operates by acquiring the lens
information such as focal length.
If the camera uses a DA, DA L, D FA, FA J, FA or F lens, the lens
information is automatically acquired when the Shake Reduction
function is activated.
If another type of lens is used, the lens information cannot be
automatically acquired even when the Shake Reduction function is
activated. In this case, the [Input Focal Length] setting menu appears.
Set [Focal Length] manually on the menu.
1 Setting the Focal Length (p.124)
4

Turning On the Shake Reduction Function

1
Press the 4 button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
(2345) to select [Shake
Reduction] and press the 4
button.
The [Shake Reduction] screen appears.
3
Use the four-way controller (45)
to select [On].
Shake Reduction Shake Reduction
On On
ISO
AWB
AUTO
AF.A
10
JPEG
OFF OFF
Shake Reduction Shake Reduction
On On
400
M
OK OK
OK