Pentax K-m/K2000 Operating Manual page 101

The shutter speed and aperture value are
displayed in the viewfinder and status
screen.
On the status screen, the e-dial indicator
appears next to the shutter speed or
aperture value, depending on which is
being adjusted.
Of the shutter speed and aperture value,
the value being adjusted is underlined in
the status screen.
While adjusting the shutter speed or
aperture value, the difference from the
appropriate exposure (EV value) appears
in the viewfinder. The appropriate
exposure is set when [0.0] is displayed.
• When the sensitivity is set to [AUTO] and exposure mode is set to a
(Manual) mode, the sensitivity is set to a value equivalent to ISO 100 if the
Dynamic Range is set to [Off] and ISO 200 if set to [On].
• Set the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV.
Set in [1. EV Steps] in the [A Custom Setting 1] menu. (p.105)
• When using a lens with an aperture ring,
set the aperture to the s position while
holding down the auto-lock button on the
lens.
Exposure Warning
While adjusting the shutter speed or
aperture value, the difference from the
appropriate exposure blinks when it
becomes larger than ±3.0.
M
1/ 9 0
4 . 0
F
E
ISO
AWB
AF.A
10
JPEG
OFF OFF
OK
Difference from the
appropriate exposure
99
123
+ 1. 5
200
M
4