Pentax K-m/K2000 Operating Manual page 255

Error Message
Not enough battery
remaining
to clean sensor
Not enough battery
remaining to activate
Pixel Mapping
Image folder cannot be
created
The image is not stored
Settings not stored
NG
No more images can be
selected
This RAW file cannot be
developed
This image cannot be
filtered
The camera failed to
create an image
No DPOF files
Printer error
No paper in the printer
Printer settings
are changed
Description
Appears during sensor cleaning if the battery
level is insufficient. Replace the batteries with
new ones or use an AC adaptor kit K-AC84
(optional). (p.40)
Appears during pixel mapping if the battery level
is insufficient. Replace the batteries with new
ones or use an AC adaptor kit K-AC84 (optional).
(p.40)
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.214)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings or rotation information could
not be saved because SD Memory Card is full.
Delete unwanted images and perform DPOF
settings or rotation again. (p.73)
The camera was unable to measure the manual
white balance or detect dust on the sensor. Try
the operation again. (p.161, p.244)
You cannot select 100 or more images to delete
at a time. (p.180)
RAW files captured with other cameras cannot
be edited on this camera.
Appears when digital filter is started for images
captured with other cameras.
The creation of an index print image failed.
(p.172)
No files are set with DPOF. Set DPOF and then
print. (p.200)
There is an error with the printer and the file
cannot be printed. Fix all the errors and try
printing again.
Printer has run out of paper. Put paper in the
printer and print.
The camera received a notification that the
printer status has changed. Press the 4 button
to reconnect to the printer.
253
12