Pentax K-m/K2000 Operating Manual page 262

260
Remote Control
Mirror
Digital Filter
Custom Image
Exposure Bracket
Exposure Meter/
Exposure Range
EV Compensation
AE Lock
Built-in Flash
External Flash Sync
Custom Function
Time Function
Shake Reduction
Function
Dust Removal
Power
12
Battery Exhaustion
In/Out Port
Video Output Format NTSC/PAL
PENTAX Remote Control F (optional) Release shutter
immediately or three seconds after pressing the remote control
shutter release button
Quick-return mirror, mirror up function (2 sec. self-timer)
Toy Camera, High Contrast, Soft, Star Burst, Retro, Extract
color, Illustration, HDR, B&W, Sepia, Color, Slim, Brightness,
Custom
Image Tone (6 types), Saturation/Filter Effect, Hue/Toning,
Contrast, Sharpness/Fine Sharpness
Three frames (underexposed, proper exposure and
overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/2 EV and 1/3 EV for EV steps)
TTL multi (16-segment metering), Exposure range from EV 0 to
EV 21 at ISO 100, with 50 mm f/1.4 lens, Center-weighted or
Spot metering method can be set
±3 EV (1/2 EV Steps), ±2 EV (1/3 EV Steps), EV Steps can be
selected
Can be assigned to the = button using the Custom Functions
(timer type: two times the meter operating time set in Custom
Setting) Continuous as long as the shutter release button is
halfway pressed.
P-TTL built-in flash with serial control, GN approx. 11 (ISO 100),
Angles of coverage: 28 mm lens angle of view (35 mm
equivalent), Flash synchronization speed range at 1/180 sec.
and slower, Daylight-sync flash, Slow-speed-sync flash, ISO
range = P-TTL: 100 to 3200, Auto-popup function
Hot shoe with M-contact, which couples with PENTAX
dedicated auto flashes, ISO range = P-TTL: 100 to 1600,
Automatic flash, Red-eye reduction flash function, High-speed-
sync and wireless-sync with PENTAX dedicated flash
21 functions can be set
World Time settings for 75 cities (28 time zones)
CCD Image Sensor Shift, effective compensation range = up to
4 EV (dependent on the used lens type and shooting conditions)
SP coating and CCD operations for dust removal. Can be set to
operate when the camera is turned on.
Four AA lithium, AA Ni-MH rechargeable, or AA alkaline
batteries
Battery exhaustion symbol ? is lit. (The shutter is locked
when ? starts blinking.)
USB/Video terminal (USB 2.0 (high speed compatible))