Pentax K-m/K2000 Operating Manual page 26

24
• Settings that cannot be changed due to the current camera setup cannot be
selected.
• The status screen will disappear after the time set for [3. Meter Operating
Time] in the [A Custom Setting 1] menu (the default setting is 10 seconds).
Press the M button to display it again.
• When the [21. Display status] setting in the [A Custom Setting 3] menu is set
1
to Off, the status screen is displayed only when the M button is pressed.
(p.221)
Playback Mode
The camera switches display information when you press the M
button during playback.
Standard
Histogram display
Detailed information
display
No info. display
The information that is shown first during playback is the same as that of the
last playback in the previous session. The [Standard] screen can always be
displayed first by setting [Playback Display] to P (Off) in [Memory] (p.229) in
the [A Rec. Mode 3] menu.
Captured images and indicators are displayed.
Images and histogram (Brightness/RGB) are displayed.
Detailed showing of how and when the images were taken
is displayed.
Only captured images are displayed.
100-0001 100-0001 100-0001
1/2000 1/2000 1/2000
F2.8 F2.8 F2.8
Standard
M
No info. display
M
RGB RGB RGB
Histogram display
M
1 / 2 0 0 0 1 / 2 0 0 0 1 / 2 0 0 0
F 2 . 8 F 2 . 8 F 2 . 8 + 1 . 5 + 1 . 5 + 1 . 5
ISO ISO ISO 200 200 200
JPEG JPEG JPEG
10
07 07 07 07 07 07 2008 / / / / 2008 2008 10 10 : 39 39 10 : 39 AM AM AM
Detailed information display
100-0001 100-0001 100-0001
M
P P 1 0 0 - 0 0 0 1 1 0 0 - 0 0 0 1 1 0 0 - 0 0 0 1
AF.S AF.S AF.S
24mm 24mm
- 0 . 5 - 0 . 5 0 . 5 ± 0 ± 0
G2 G2 A1 A1 G2 A1 ± 0 ± 0
AdobeRGB AdobeRGB AdobeRGB ± 0 ± 0
± 0 ± 0