Pentax K-m/K2000 Operating Manual page 99

• Turn the e-dial while pressing the mc button to change the EV
compensation value. (p.104)
• Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [A Custom Setting 1] menu. (p.105)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria. Set [Sensitivity] to [AUTO]. (p.87)
• When using a lens with an aperture ring,
set the aperture to the s position while
holding down the auto-lock button on the
lens.
Exposure Warning
If the subject is too bright or too dark,
the shutter speed will blink in the
viewfinder. When the subject is too
bright, set the aperture smaller (larger number), and when too dark,
open the aperture further (smaller number). Once blinking stops, you
can take a picture with the proper exposure.
Use an optional ND (Neutral Density) filter if the subject is too bright.
Use a flash if it is too dark.
97
4