Engine Switch; (Vehicle With Keyless Push Start System) - Suzuki Ciaz series Owner's Manual

Table of Contents

Advertisement

OPERATING YOUR VEHICLE
WARNING
(Continued)
• Always return the ignition switch to
the "LOCK" position and remove
the ignition key when leaving the
vehicle even if only for a short time.
Also do not leave children alone in
a parked vehicle. Unattended chil-
dren could cause accidental move-
ment of the vehicle or could tamper
with power windows or power sun-
roof. They also could suffer from
heat stroke in warm or hot weather.
These could result in severe injury
or even death.
NOTICE
• Do not use the starter motor for
more than 12 seconds at a time. If
the engine does not start, wait 15
seconds before trying again. If the
engine does not start after several
attempts, check the fuel and igni-
tion
systems
or
consult
SUZUKI dealer.
• Do not leave the ignition switch in
the "ON" position if the engine is
not running as the battery will dis-
charge.
3-5

Engine Switch

(Vehicle with Keyless Push
Start System)
EXAMPLE
LOCK (OFF)
This mode is for parking the vehicle. When
this mode is selected by pressing the
engine switch and then any door is opened
or closed, the steering will be locked auto-
your
matically.
ACC
Press the engine switch to select this igni-
tion mode to use such electric equipment
as the audio system, outside rearview mir-
rors and accessory socket with the engine
off. When this position is selected, the
information display in the instrument clus-
ter come on. Refer to "Warning and Indica-
tor Lights" in the "BEFORE DRIVING"
section for details.
ON
• With the engine off
You can use such electric equipment as
the power windows and wipers with the
engine off. When this ignition mode is
selected by pressing the engine switch,
the information display in the instrument
cluster will come on.
• With the engine on
All electric equipment is operational. The
vehicle can be driven when you have
selected this ignition mode by pressing
the engine switch.
START
Provided you have the keyless push start
system remote controller with you, the
61MM0B001
engine automatically starts when you
press the engine switch to select this igni-
tion mode after placing the gearshift lever
in the "P" position and depressing the
brake pedal. (If you need to re-start the
engine while the vehicle is moving, shift
into "N".)
79MS0-14E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents