How To Operate The Setting Mode - Suzuki Ciaz series Owner's Manual

Turn the indicator selector knob
(3).
Push the indicator selector
knob (3).
NOTE:
Depending on vehicle's specifications,
some items may not be displayed.

How to operate the setting mode:

1) When the ignition switch is in the "ON"
position or press the engine switch to
change the ignition mode to "ON" and
the vehicle is stationary, push the trip
meter selector knob (2) to switch the
information display indication (C) to the
trip meter.
2) Push and hold the indicator selector
knob (3) until the display shows "
3) Turn and/or push the indicator selector
knob (3) to select a function that you
want to set up according to the above
chart.
4) Turn and/or push the indicator selector
knob (3) to register settings of the fol-
lowing functions.
Central door locking system "
• : Unlock all doors by turning the
key, pushing the keyless entry
system transmitter, keyless
push start system remote con-
troller or request switch once
• : Unlock all doors by turning the
key, pushing the keyless entry
system transmitter, keyless
push start system remote con-
troller or request switch twice
(default setting)
Door locking and unlocking
buzzer " "
• : Buzzer sounds
door(s) is(are)
unlocked by using the key-
less push start system remote
controller or request switch
(default setting)
• : Buzzer does not sound when
".
the door(s) is(are) locked or
unlocked by using the key-
less push start system remote
controller or request switch
BEFORE DRIVING
" Additional flashes
of the turn signal "
• : Turn signal
times after the turn signal
lever is returned
(default setting)
• : Disable the additional flashes
of turn signal
Security system "
• : Enable the security system
(default setting)
• : Disable the security system
Initialization setting "
when the • : Initialize all settings
locked or
"
flashes three
"
"
2-54
79MS0-14E