Suzuki Ciaz series Owner's Manual page 96

NOTE:
If the gearshift lever is in any position other
than "P", or if the knob button is pushed
when the gearshift lever is in "P" position
the ignition mode cannot be returned to
"LOCK" (OFF).
If the "PUSH" indicator light blinks and
the ignition modes cannot be selected
Your keyless push start system remote con-
troller may not be sensed as being within the
"interior workable area" (refer to the related
explanation in this section). Try again after
making sure you have the remote controller
with you. If the ignition modes still cannot be
selected, the battery of the remote controller
may be discharged. To be able to select an
ignition mode, you must then use the follow-
ing method:
EXAMPLE
(1)
(2)
1) Without depressing the brake pedal,
push the engine switch (1).
2) Within about 10 seconds during which
the "PUSH" indicator light in the instru-
ment cluster is blinking, touch the
engine switch with the lock switch end
of the remote controller (2) for about 2
seconds.
OPERATING YOUR VEHICLE
NOTE:
• If you still cannot select the ignition
modes, there may be some problem with
the keyless push start system. Contact
an authorized SUZUKI dealer for an
inspection of the system.
• The immobilizer/keyless push start sys-
tem warning light come on for about 5
seconds while the "PUSH" indicator light
is blinking. Refer to "Warning and Indica-
tor Lights" in the "BEFORE DRIVING"
section for details.
• You may customize the system to cause
the interior buzzer to sound once for the
"remote controller out of sensing range"
57L21131
warning. To incorporate this customiza-
tion, please contact an authorized
SUZUKI dealer.
• If the battery of the remote controller is
about to become completely discharged,
the keyless push start system remote con-
troller battery consumption warning light in
the instrument cluster will come on for a
few seconds when you press the engine
switch to change the ignition mode to
"ON". Refer to "Warning and Indicator
Lights" in the "BEFORE DRIVING" section
for details. For details on replacing the bat-
tery, refer to the "Keyless Push Start Sys-
tem Remote Controller" in the "BEFORE
DRIVING" section.
3-8
79MS0-14E